This page was exported from Quickly Pass Test With Lead2pass New Brain Dumps [ https://www.freepass4sure.net ] Export date:Sun Jan 17 10:03:52 2021 / +0000 GMT ___________________________________________________ Title: [2017-12-07] Lead2pass 2017 100% Real 300-360 Exam Questions (95-115) --------------------------------------------------- New Exam 300-360 Dumps From Lead2pass Cover All 300-360 New Questions.v.2017-12-07.140q https://www.lead2pass.com/300-360.html QUESTION 95 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDF A wireless engineer is hired to design a network for six buildings with a WLC in each building to support the access points.Which type of wireless architecture is being used? A.    distributed deploymentB.    autonomous deploymentC.    unified deploymentD.    centralized deployment Answer: B QUESTION 96 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFThe ClO of a company wants to start tracking inventory in the warehouse using RFID tags and their existing wireless network.The company hires a wireless engineer to ensure that their existing network can support this new initiative.Which tool in Cisco Prime can help the wireless engineer? A.    Planning ModeB.    Map EditorC.    Site SurveyD.    Location Readiness Answer: DExplanation:Using Chokepoints to Enhance Tag Location ReportingInstallation of chokepoints provides enhanced location information for RFID tags. When an active Cisco-compatible Extensions Version 1-compliant RFID tag enters the range of a chokepoint, it is stimulated by the chokepoint. The MAC address of this chokepoint is then included in the next beacon sent by the stimulated tag. All access points that detect this tag beacon then forward the information to the controller and location appliance.https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/user/guide/pi_ug/wireless-maps.html#91300 QUESTION 97 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFIEEE 802.llk-2008 is an amendment to IEEE 80211-2007 standard for radio resource management. A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices? A.    802.1 1rB.    802.1 1wC.    802.1 1iD.    802.1 1k Answer: DExplanation:You can optimize roaming for non-802.11k clients by generating a prediction neighbor list for each client without sending an 802.11k neighbor list request. When prediction based roaming enables a WLAN, after each successful client association/re-association, the same neighbor list optimization applies on the non-802.11k client to generate and store the neighbor list in the mobile station software data structure. Clients at different locations have different lists because the client probes are seen with different RSSI values by the different neighbors as the clients usually probe before any association or re-association. This list is created with the most updated probe data and predicts the next AP that the client is likely to roam to.https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enter prise_Mobility_8-1_Deployment_Guide/Chapter-11.html QUESTION 98 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFWhich option is an advantage at using Cisco CleanAir technology in your wireless network? A.    CleanAir can be used on an AP in monitor mode so that the AP serves client traffic and monitors for interference simultaneously.B.    A single CleanAir AP can be used to analyze RF traffic from many APsC.    CleanAir is a software feature that can be added to arty AP to start monitoring interference and air quality.D.    CleanAir operates 24/7 and constantly monitors for interference and air quality issues. Answer: DExplanation:An advantage of CleanAir technology is that it operates 24/7, constantly monitoring for interference and air quality issues (see Figure 2). This allows IT to take a more proactive approach to spectrum management. Instead of waiting for interference to be reported by an end user (in the form of a trouble ticket) and then dispatching a tool to analyze the problem, IT can find interference as soon as it occurs and take immediate action. Having a 24/7 history also makes it possible to look back in time. Using historical data, it's easy to perform analyses of trends over time.https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/cleanair-technology/white_paper_ c11-599260.html QUESTION 99 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFYou are designing a wireless network to support high user density in the 5 GHz spectrum. Which option is the benefit of selecting a channel width of 20 MHz instead of selecting a higher channel width? A.    increased bandwidthB.    increased throughputC.    decreased co-channel interferenceD.    decreased speed Answer: CExplanation:If forced to reuse 5 GHz channels, more consistent results will be delivered using strictly 20 MHz channels and avoiding loss of efficiency due to CCI.https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#_Toc309331077 QUESTION 100 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFRefer to the exhibit. An engineer has determined that Cisco 7925 phones are roaming between 2.4 6Hz and 5 6Hz radios on the same access points, which results in poor audio performance Which action must the engineer take to mitigate this issue? A.    Enable TPCv2 to normalize the RF environment.B.    Configure EDCA parameters for Voice Optimized.C.    Configure the Cisco 7925 phone to only use 5 6Hz.D.    Enable Band Select on the WLAN Answer: B QUESTION 101 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFAn engineer is preparing for an active site survey of a hospital and is informed that he or she should not enter any active surgery suites.Which option describes how the engineer should address this restriction? A.    Conduct a passive wireless survey in the restricted areas.B.    Use the predictive AP placement tool on the wireless controllerC.    Skip the area and estimate where to place the access points.D.    Arrange to perform survey activities after hours. Answer: AExplanation:Passive SurveyPassive surveys are surveys that are performed with a listen-only mode. The survey client never associates to the access point (AP). Such surveys can be helpful when you look for rogue devices or you want a good gauge of downlink RF coverage from the infrastructure devices.These can be accomplished with a passive survey: QUESTION 102 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFAn access point will be partially exposed to the outdoor environment in a loading dock of a factory. How should this access point be deployed in a cost-effective manner? A.    indoor AP with an external leaky coaxial cableB.    outdoor mesh AP utilizing the 5-GHz bandC.    outdoor bridge AP pointing its antenna toward the factoryD.    indoor-based AP inside a NEMA-rated enclosure Answer: BExplanation:Because mesh radio waves have very high frequency in the 5-GHz band, the radio wavelength is small; therefore, the radio waves do not travel as far as radio waves on lower frequencies, given the same amount of power. This higher frequency range makes the mesh ideal for unlicensed use because the radio waves do not travel far unless a high-gain antenna is used to tightly focus the radio waves in a given direction.https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-0MR1/design/guide/MeshAP_70MR1.html#wp1849065 QUESTION 103 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFWhich two information points should a pre-site survey questionnaire contain? (Choose two.) A.    list of clients usedB.    hours during which the survey can be performedC.    access point density requiredD.    approximate square footage of facilityE.    total number of APs in use Answer: CDExplanation:https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html#anc38 QUESTION 104 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFA customer has determined that aesthetics is a primary concern for their upcoming guest deployment.Which design consideration can be leveraged to address this concern? A.    Paint the access point to cover the LED from being noticeableB.    Use enclosures to hide the wireless infrastructure in the surrounding environmentC.    Deploy environmentally friendly cabling components to blend into the environment.D.    Use AIR-AP-BRACKET-1 to allow for greater mounting locations Answer: C QUESTION 105 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFYou deploy a wireless network for a common area located outside of a student dorm by using patch antennas. Students report weak signals in specific locations of the coverage area.Which option is a possible cause of the issue? A.    neighboring buildingsB.    vehiclesC.    treesD.    Bluetooth interference Answer: D QUESTION 106 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFIEEE 802.11r-2008 or fast BSS transition (FT), also called "fast roaming," Which 802.11 standard performs the PTK calculations in advance to enable fast client roaming? A.    802.1 11rB.    802.1 11iC.    802.1 11kD.    802 1 11w Answer: AExplanation:802.11r, Which is the IEEE standard for fast roaming, introduces a new concept of roaming where the initial handshake with the new AP is done even before the client roams to the target AP, which is called Fast Transition (FT). The initial handshake allows the client and APs to do the Pairwise Transient Key (PTK) calculation in advance. These PTK keys are applied to the client and AP after the client does the reassociation request or response exchange with new target AP.https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/80211r-ft/b-80211r-dg.html QUESTION 107 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFWhich three factors must you consider before you deploy APs to a wireless network located in a warehouse? (Choose three.) A.    conveyor beltsB.    employee schedulesC.    ceiling heightD.    variable inventory quantitiesE.    types of wallsF.    deliveries Answer: BCE QUESTION 108 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFDuring a post-deployment survey, the wireless engineer notices that offices in surrounding suites also have wireless networks and the 2.4 Ghz band is highly utilized Which configuration must the engineer make on the wireless network using this new information? A.    Disable 802.11 b/g data rates.B.    Enable Band Sect in the WLCC.    Disable RRM in the WLC.D.    Enable rogue access point containment. Answer: DExplanation:Monitoring Rogue Access Point AlarmsRogue access point radios are unauthorized access points detected by one or more Cisco lightweight access points.This page displays rogue access point alarms based on the severity you clicked in the Alarm Monitor.https://www.cisco.com/c/en/us/td/docs/wireless/mse/3350/5-2/wIPS/configuration/guide/msecg_wIPS/msecg_appB_wIPS.html#wp1244525 QUESTION 109 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFAn engineer must design a wireless voice network and is auditing the existing configuration.Which two actions must be taken? (Choose two.) A.    Enable Platinum QoS profile on the SSIDB.    Disable Coverage Hole Detection.C.    Ensure the switch ports trust DSCP QoS markingsD.    Disable WMM on the QoS tabE.    Ensure that Client Load Balancing is enabled. Answer: ACExplanation:https://mrncciew.com/2012/11/28/understanding-wireless-qos-part-1/ QUESTION 110 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFAn engineer is implementing Q0S for a new wireless voice network. Which two considerations should be identified first? (Choose two.) A.    QoS markingB.    policingC.    QoS requirementsD.    data traffic usageE.    traffic classification Answer: CE QUESTION 111 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFAn engineer is determining powering requirements for a P2P wireless link using Cisco Aironet 1572EC access points.Which power method is valid for the access point? A.    802.3af Power over EthernetB.    Power over CableC.    Cisco Inline PowerD.    802.3at Power over Ethernet Answer: B QUESTION 112 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDF17.A network engineer is performing a site survey in preparation for an installation. Which three hardware parameters must be inspected? (Choose three.) A.    routing protocol usedB.    PoE capabilityC.    switch STP capabilityD.    distance of antenna to communications roomE.    switch port availabilityF.    distance of access point to communications room Answer: BEF QUESTION 113 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFAn engineer has added an access point to a deployment after a post-installation site survey. The engineer then notices that there has been an increase in co-channel interference and retransmissions. Which two features can help mitigate the issue? (Choose two.) A.    Coverage Hole DetectionB.    Transmit Power ControlC.    Enhanced Distributed Channel AccessD.    Cisco Compatible ExtensionsE.    Dynamic Channel Assignment Answer: CE QUESTION 114 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFYou are planning the coverage for wireless VoIP by using Ekahau. Which signal strength does Ekahau recommend using for VoIP? A.    -84 dBmB.    -76 dBmC.    -67 dBmD.    -53 dBm Answer: CExplanation:Each vendor has their own recommended signal strength for a given data rate or application. For instance, one vendor may recommend designing their VoIP solution at -67 dBm (perhaps the most widely-used value for VoIP deployment if I had to choose one), while another may say -70 dBm. In most cases the values will differ only by a couple dB.https://www.ekahau.com/blog/2015/01/13/ekahau-site-survey-heatmap-visualizations-part-2-signal-strength/ QUESTION 115 300-360 Dumps,300-360 Exam Questions,300-360 New Questions,300-360 VCE,300-360 PDFYou must upgrade a data-based wireless network to support Voice over Wireless. Which RSSI measurement do you use to redesign the wireless network? A.    -65 dBmB.    -72 dBmC.    -75 dBmD.    -67 dBm Answer: D 300-360 dumps full version (PDF&VCE): https://www.lead2pass.com/300-360.html Large amount of free 300-360 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDU1VGRGVieEdJWGM You may also need: Large amount of free 300-365 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSnBMTGlieXBLZWs Large amount of free 300-370 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSTdRZ3dTUjVscVU Large amount of free 300-375 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDaUxFbEpISnFINk0 --------------------------------------------------- Images: http://examgod.com/l2pimage/72e0a5095768_DB24/1001_thumb.jpg --------------------------------------------------- --------------------------------------------------- Post date: 2017-12-08 08:32:39 Post date GMT: 2017-12-08 08:32:39 Post modified date: 2017-12-08 08:32:39 Post modified date GMT: 2017-12-08 08:32:39 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com